Suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 remote control
Small size, light weight, easy to store and carry
Design support feet, which can be positioned and can also share the force, so that the force of the extension bracket is more balanced, and the hand-held remote control is more labor-saving
Double wall thickness and bone design make it have greater load-bearing capacity, no matter how large the flat plate can be easily carried
The clamping width of 12cm allows the tablet to be used with the shell, making installation more worry-free
This modification kit can turn the drone into a handheld gimbal, which can be used for aerial photography or land photography, and can also use the remaining power of the drone to continue shooting in an emergency.
A 1/4 tripod interface is reserved at the bottom, which can be connected to various tripods.
Hand-held can be connected to a tripod for one-hand operation, or you can directly hold the remote control for shooting operation.
Suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 remote control
Small size, light weight, easy to store and carry
Design support feet, which can be positioned and can also share the force, so that the force of the extension bracket is more balanced, and the hand-held remote control is more labor-saving
Double wall thickness and bone design make it have greater load-bearing capacity, no matter how large the flat plate can be easily carried
The clamping width of 12cm allows the tablet to be used with the shell, making installation more worry-free
Suitable for DJI Mavic 3 / Air 2 / Air 2S / Mini 2 remote control
Small size, light weight, easy to store and carry
Design support feet, which can be positioned and can also share the force, so that the force of the extension bracket is more balanced, and the hand-held remote control is more labor-saving
Double wall thickness and bone design make it have greater load-bearing capacity, no matter how large the flat plate can be easily carried
The clamping width of 12cm allows the tablet to be used with the shell, making installation more worry-free
Non-destructive and quick installation, one-button closure, and will not scratch the machine.
It does not affect the replacement of the battery, which is convenient and quick.
Soft silicone straps, anti-mushroom head locks, tightly bundled and upgraded for protection.
Effectively increase the height by about 30mm. Greatly increases the distance between the fuselage and the ground, effectively preventing the ground debris from damaging or soiling the fuselage and sensors during take-off and landing.
This modification kit can turn the drone into a handheld gimbal, which can be used for aerial photography or land photography, and can also use the remaining power of the drone to continue shooting in an emergency.
A 1/4 tripod interface is reserved at the bottom, which can be connected to various tripods.
Hand-held can be connected to a tripod for one-hand operation, or you can directly hold the remote control for shooting operation.
The remote control drone delivery device is specially customized for DJI AIR 3 drones. The functions of the mounting bracket and the launcher are two-in-one. It can release objects through the launcher and 1/4 mm of the mounting bracket. The head screws enable the mounting of small items such as action cameras.
Photosensitive setting allows direct control of delivery by remote control. Use the remote control to control the drones fill light to drop items. Turn on the drones fill light to start dropping, and turn off the fill light after the drop. The delivery distance is the same as the drones remote control distance.
The recommended load is about 400g (loading items + dropping items, for reference, please refer to the weight of RC 2 - 420g). The built-in battery capacity is 50mAh. It can be fully charged in half an hour. After full charging, it can be used about 400 times.
It is easy to install and disassemble. It is fixed on the fuselage through the mounting bracket. There are clips on the dispenser to prevent it from shaking or loosening or blocking the drones visual positioning sensor. The dispenser weighs 57g and will not affect the drones operation. flight.
Can be used in advertising, bait throwing, gift throwing, wedding flower delivery, ring delivery, food delivery, field medical supplies rescue, family reunion, Halloween, Christmas, Valentine Day, birthday parties, beach parties and other scenes to provide a perfect solution for life Add unlimited fun.
Specifically designed for DJI AIR 3, it fits the four legs brackets of AIR 3 and has a split tripod design that will not block the indicator lights, fill lights, bottom sensors and heat dissipation holes, and will not open for obstacle avoidance.
Can effectively increase the distance between the drone and the ground by 25 mm. When AIR 3 takes off or lands on uneven ground, it can reduce the impact force, allow the drone to land smoothly, and protect the AIR 3s body, sensors and gimbal camera from damage. This prevents ground debris or water stains from soiling or damaging the drone body, gimbal, and propellers. Effectively improves the DJI AIR 3 drone ability to adapt to the ground environment during takeoff and landing.
Adopting a split quick-release design, the battery can be quickly replaced without disassembly, and does not affect the folding of the drone arms. You only need to disassemble the heightening tripods on the two rear tripods to store them in the original bag, STARTRC special bag, and commercially available bags. In most bags, the other two disassembled tripods are also small and easy to carry.
Lightweight design. The entire landing gear weighs 32g. The lightweight design will not add extra burden to the flight of AIR 3, and it will not shake or fall off during flight.
Note: It cannot be used with propeller protection; the aircraft cannot be put into a waterproof box or other storage equipment without removing the rear tripod.